Due to the supply chains within our industry, we are experiencing longer than normal shipping times. If you require a time sensitive delivery, please contact us before ordering.


MIMMBCC-XD-16CBE Medium
View Larger
MIMMBCC-XD-16CBE Thumbnail MIMMBCC-XD-16CBE Thumbnail 2 MIMMBCC-XD-16CBE Small 3 MIMMBCC-XD-16CBE Small 4  
0 Star Rating
0.0
 (Be the first to Write a Review)
 
 

MISHIMOTO MMBCC-XD-16CBE BAFFLED OIL CATCH CAN

SKU: MIMMBCC-XD-16CBE  
MISHIMOTO MMBCC-XD-16CBE BAFFLED OIL CATCH CAN
 
Price:
$273.95
Qty: 
 
Keep the intake system in your 2016-2018 Nissan Titan XD 5.0L Cummins free from oil and debris with the Mishimoto MMBCC-XD-16CBE Baffled Oil Catch Can. The Mishimoto Oil Catch Can Kit features the tried and true Mishimoto design with several internal baffles to better separate oil from the crankcase vapors. Strategic positioning in the engine bay prevents condensation buildup in the catch can from freezing in cold climates. Two direct-fit hoses and an application-specific bracket make for a quick and simple installation.
    Mishimoto catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, they are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while Mishimoto catch cans trap the blow-by and keep it out of the engine permanently. When you see what's in the bottom of your catch can, you won't want that draining back into your oil either.
    FEATURES:
  • Direct Fit Mounting Bracket
  • Fully Serviceable Catch Can
  • Fully Sealed, Billet 6061 Aluminum
  • Strategic Positioning Prevents Condensation From Freezing
  • Oversized Catch Can Capacity Developed For Truck Applications
  • Mishimoto Lifetime Warranty
    SPECIFICATIONS: Overall Height: 6.4"
  • Overall Diameter: 2.5"
  • Inlet: 1/2" NPT
  • Outlet: 1/2" NPT
  • Drain Plug Thread Size: 3/8" NPT
  • Capacity: 4 Oz.
  • Kit Includes: Mounting Bracket, Black 6061 Catch Can, Direct-Fit Hoses, Fittings, Clamps, Hardware
    Install Notes: Install Torque Specs: 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).
    After installation, Mishimoto recommends checking the contents of the baffled catch can every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle
    Vehicles affected by Nissan service campaign #PC511 may require an ECU tune to use this catch can kit without a check engine light. The ECU re-flash performed under this campaign increases the sensitivity of the CCV pressure sensor and may lead the ECU to believe that a CCV hose is unplugged when using this kit. Please contact your dealer to verify if your vehicle has been re-flashed under this campaign.
 Average Rating:  0 Star Rating
0.0
 
Write a Review