EGT Sims, 100 OHM, 2013-2015 Dodge Ram 6.7L Cummins

EGT Sims, 100 OHM.
Will keep the ECM from commanding a regeneration by elevating temperatures far above what the ECM should see.
For 2013, 2014, 2015 Dodge Ram 6.7L Cummins.
Replaces Shibby Engineering SH2013EGT100

The 100 OHM EGT Sims for your 2013-2015 Dodge 6.7L Cummins will keep the ECM from commanding a regeneration by elevating temperatures far above what the ECM should see. Because of this, upon installation the 100 Ohm sims will also throw an immediate check engine light.

FEATURES:
• Disables Regeneration
• 100 Ohm Simulators
• Requires DPF Race Pipe
• For Off-Road Use Only
• DPF Pressure Sim May Be Required
Tech Notes:The DEF system must remain intact on the vehicle. The nozzle can be tied out of the way, or remounted in the exhaust but it must remain plugged in and plumbed in. These items are for off-road, closed-course, race use only. There are no guarantees that these items will allow "code-free" operation.

On some calibrations, vehicles will require a DPF pressure sim to avoid having a "see dealer now" message in the driver info center. Unfortunately, due to constant changes from Ram, there is no way to track down what trucks will or will not need the pressure sim. For this reason it's recommended that you purchase it. There should be no negative effects if the sim is installed on a truck that doesn't actually require it.

Not available for sale in the state of California