Swamps Diesel Heavy Duty Rebuilt 48V Fuel Injection Control Module
Part Number: SW_48V_FICM
* Required Fields
Swamps Diesel 48v Fuel Injection Control Modules come pre-programmed with the latest factory Ford programming. These units are fully tested (on a test bench, actually sending signals to 8 fuel injectors), with a 30 amp load, and are ready to install & drive away. No reprogramming by Ford is required.
PHP FICM Tuning: All PHP tuning utilizes the latest inductive heating strategies strategies for improved cold temperature startups and operation. With 4 power levels to choose from (Economy, Atlas 40, Atlas 80, and Hercules) PHP programs complement any ECM tuning, whether it is stock or modified.
• Economy: Most users see fuel economy gains as well as improved tip-in throttle response and better overall drivability from, idle up to through 3500 RPM. We also eliminate that annoying injector post buzz.
• Atlas 40: Gains of 40hp can be expected along with greater off-idle throttle response and slightly improved fuel economy over most stock FICM software versions
• Atlas 80: Gains of 80hp can be expected with this flash as well as moderately increased fueling strategies, which greatly improve bottom end acceleration and throttle response throughout the powerband.
• Hercules 100: Gains of 100hp have been recorded on the dyno with a slightly modified vehicle. With aggressive fueling rates and crisp throttle response, this software flash is the right choice if you are looking to squeeze every least hp out of your 6.0L.
Features:• 48V FICM
• Fully Tested
• Direct Replacement
Note On Cores:Swamps will only accept a FICM if it meets the following guidelines, No external case/connector damage. No water/coolant contamination, etc. Sending a core that has been soldered on will void a full core credit.